M5CT - M-Systems M5CT M5-UNIT Series Terminal Block Signal Conditioner; CT Transmitter

M5CT - M-Systems M5CT M5-UNIT Series Terminal Block Signal Conditioner; CT Transmitter...

Request Quote
For Price

Part Number:: M5CT
Model Number:: M5CT
Make:: M-SYSTEMS
Lead Time:: Available
Qty In Stock:: Available

M-Systems M5CT M5-UNIT Series Terminal Block Signal Conditioner; CT Transmitter Simple Type: Signal Conditioning

Signal conditioners convert a field signal from various sensors into standard signal suitable for processing in PLC, DCS or PC-based systems. They are also used to boost a signal to increase load drive capability, to isolate a signal to stop ground loops. More than 75000 combinations of process signal I/O, power input and mounting configuration are selectable. Additionally, M-System offers the broadest line of signal splitters available. M5 Series Transmitters are designed to accept a wide variety of process signal input and provide a standard and non-standard DC output.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

2000V AC isolation (1500V AC for AC powered)
CE marking for 24 V DC power
Converts an alternating current from a current transformer into a standard process signal
High-density mounting
Only 41 mm (1.61 in") deep modules can be installed anywhere, even behind the panel cover
Power indicator LED
Selectable power input 24V DC, 85–264V AC
Standard DIN rail mounting
The M5 Series features single channel four-wire models
True RMS sensing

Specifications

General

AC Power Consumption: Approx. 2 VA at 100 V; Approx. 3 VA at 200 V; Approx. 3 VA at 264 V
Accuracy: ±0.3 % with input 5 – 100 % (Input 10 – 100 % for the output codes 4W and 5W)
Connection: M3.5 screw terminals (torque 0.8 N•m)
Construction: Terminal block
DC Power Consumption: Approx. 2 W
Dielectric strength (input to output to power to ground): DC powered: 2000 V AC @1 minute; AC powered: 1500 V AC @1 minute
Housing material: Flame-resistant resin (black)
Insulation resistance: Greater than or equal to 100 M Omega with 500 V DC
Isolation: Input to output to power
Line voltage effect: ±0.1 % over voltage range
Mounting: DIN rail
Operating humidity: 0 to 90 %RH (non-condensing)
Operating temperature: -5 to +55°C (23 to 131°F)
Power LED: Green light turns on when the power is supplied.
Response time: Less than or equal to 0.5 sec. (0 – 90 %)
Ripple: 0.5 %p-p max
RMS sensing: Up to 15 % of 3rd harmonic content
Screw terminal: Nickel-plated steel
Span adjustment: 98 to 102 % (front)
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Weight: 80 g (2.8 oz)
Zero adjustment: -2 to +2 % (front)

Applications

None Available

Aliases

None Available

M-SYSTEMS Industrial Partner