M3LU2 - M-Systems M3LU2 M3-UNIT Series PC Programmable Signal Conditioner; Universal Transmitter...
Request Quote
For Price
- Part Number:
- M3LU2
- Model Number:
- M3LU2
- Make:
- M-SYSTEMS
- Lead Time:
- Available
- Qty In Stock:
- Available
M-Systems M3LU2 M3-UNIT Series PC Programmable Signal Conditioner; Universal Transmitter (field- and PC-configurable) Simple Type: Signal Conditioning
Signal conditioners convert a field signal from various sensors into standard signal suitable for processing in PLC, DCS or PC-based systems. They are also used to boost a signal to increase load drive capability, to isolate a signal to stop ground loops. More than 75000 combinations of process signal I/O, power input and mounting configuration are selectable. Additionally, M-System offers the broadest line of signal splitters available. These thin profile M3-Unit Series are PC Programmable; "ONE-STEP CAL" signal conditioners; programming without needing a PC is also available.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- CE marking
- Easy ‘One-Step Cal’ calibration using the front three control buttons without needing a PC; PC software is also usable.
- Front control button function can be locked
- I/O type and ranges are configurable
- Universal input: mV, V, mA, T/C, RTD, resistance and potentiometer
Specifications
- ‘One-Step Cal’ calibration: With I/O type and the full-scale range configured via the internal DIP switches, precise 0 % and 100 % ranges are calibrated via the front control buttons with a help of LED.
- AC Power input: Approx. 4 VA at 100 V; Approx. 5 VA at 200 V; Approx. 6 VA at 264 V
- Burnout (other than current or voltage (V) input): Upscale, downscale or no burnout selectable; Also detects wire breakdown and overrange input exceeding the electrical design limit for DC input.
- Burnout response: Less than or equal to 10 sec
- Cold junction compensation (T/C): CJC sensor (included) to be attached to the input terminals
- Cold junction compensation error: ±1.0°C at 0 – 50°C (±1.8°F at 32 – 122°F)
- Configurator connection: 2.5 dia. miniature jack; RS-232-C level
- Connection: Removable terminal block
- DC Power input: Approx. 3 W
- Dielectric strength: 2000 V AC @1 minute (input to output to power to ground)
- Housing material: Flame-resistant resin (gray)
- Insulation resistance: Greater than or equal to 100 M Omega with 500 V DC
- Isolation: Input to output to power
- Line voltage effect: ±0.1 % over voltage range
- Mounting: DIN rail
- Operating humidity: 30 to 95 %RH (non-condensing)
- Operating temperature: -25 to +60°C (-13 to +140°F)
- Over-range output: -15 to +115 % (Negative current output is not available.)
- PC configurator: (model-M3LUCFG) Via Windows PC connected to the front jack.
- Response time: Less than or equal to 0.2 sec. (0 – 90%, DC input)
- Span adjustment: 85 to 115 % (front)
- Status indicator LED: Tri-color (green/amber/red) LED; Flashing patterns indicate operation status of the transmitter.
- Temp. coefficient: ±0.015 %/°C [±0.008 %/°F] at -5 to +55°C [23 to 131°F] of max. range
- Weight: 100 g (3.53 oz)
- Zero adjustment: -15 to +15 % (front)
Applications
- None Available
Aliases
- None Available