M2XRP2 - M-Systems M2XRP2 Signal Conditioner. Mini-M Series | Encoder Speed Transmitter...
Request Quote
For Price
- Part Number:
- M2XRP2
- Model Number:
- M2XRP2
- Make:
- M-SYSTEMS
- Lead Time:
- Available
- Qty In Stock:
- Available
M-Systems M2XRP2 Signal Conditioner. Mini-M Series | Encoder Speed Transmitter (PC Programmable; built-in excitation) Simple Type: Signal Conditioning
Signal conditioners convert a field signal from various sensors into standard signal suitable for processing in PLC, DCS or PC-based systems. They are also used to boost a signal to increase load drive capability, to isolate a signal to stop ground loops. More than 75000 combinations of process signal I/O, power input and mounting configuration are selectable. Additionally, M-System offers the broadest line of signal splitters available. M2 Series Signal Conditioners are designed to accept a largest range of process signal inputs and provide a standard and non-standard DC output.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Built-in excitation
- CE marking
- Converts a two-phase forward and reverse rotation pulse signal with 90 degree phase difference into a forward and reverse speed signal
- Direct RS-422 input
- Input pulse monitoring LED
- PC programmable input and output ranges
- UL approval
Specifications
- Accuracy: Input accuracy + output accuracy
- Configuration: Via PC Configurator Software (model:JXCON) on the Windows PC connected to the front jack.
- Configurator connection: 2.5 dia. miniature jack; RS-232-C level
- Connection: M3 screw terminals (torque 0.8 N•m)
- Construction: Plug-in
- Dielectric strength: 2000 V AC @1 minute (input to output to power to ground)
- Excitation adjustment: 5V or 12V DC
- Housing Material: Flame-resistant resin (black)
- Input monitor (PL1): Green LED blinks according to the input phase A.
- Input monitor (PL2): Green LED blinks according to the input phase B.
- Isolation: Input to output to power
- Line voltage effect: ±0.1 % over voltage range
- Low-end cutout: 100 msec. – 100 sec. or no cutout Programmable
- Over-range output: Approx. -15 to +115 % at 1 – 5 V
- Pulse sensing: DC coupled or capacitor coupled selectable with DIP SW
- Response time: 0.5 sec. + 1 pulse cycle (0 – 90 %)
- Span adjustment: 95 to 105 % (front)
- Status indicator LED: Red LED; Flashing patterns indicate different operating status of the transmitter.
- Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) of I/O range at -5 to +55°C [23 to 131°F]
- Zero adjustment: -5 to +5 % (front)
Applications
- None Available
Aliases
- None Available