M2AS1 - M-Systems M2AS1 Mini-M Series Super-mini Signal Conditioner; DC Alarm (thumb-wheel...
Request Quote
For Price
- Part Number:
- M2AS1
- Model Number:
- M2AS1
- Make:
- M-SYSTEMS
- Lead Time:
- Available
- Qty In Stock:
- Available
M-Systems M2AS1 Mini-M Series Super-mini Signal Conditioner; DC Alarm (thumb-wheel switch adjustments; single SPDT output) Simple Type: Signal Conditioning
Signal conditioners convert a field signal from various sensors into standard signal suitable for processing in PLC, DCS or PC-based systems. They are also used to boost a signal to increase load drive capability, to isolate a signal to stop ground loops. More than 75000 combinations of process signal I/O, power input and mounting configuration are selectable. Additionally, M-System offers the broadest line of signal splitters available. M2 Series Signal Conditioners are designed to accept a largest range of process signal inputs and provide a standard and non-standard DC output.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 2000V AC isolation
- Base socket included with modules
- CE marking and UL/C-UL Class 1 Div 2 approval (selected models)
- Fixed range or PC programmable models selectable
- M2 use a compact-size, plug-in socket base for quick installation or replacement of modules without disturbing wiring.
- Selectable 100-240V AC/24V DC power input
- Standard DIN rail or surface mounting
Specifications
- Connection: M3 screw terminals (torque 0.8 N-m)
- Construction: Plug-in
- DC Current: Shunt resistor attached to the input terminals (0.5 W)
- DC Power input: Approx. 3 W
- Dead-band set-point accuracy: ± 0.5 %
- Dielectric strength: 2000 V AC @1 minute (input to output to power to ground)
- Front LED: Red light turns on when the coil is energized
- Housing Material: Flame-resistant resin (black)
- Hysteresis (dead-band): Thumb-wheel switches (front); 1 – 99 % independently; 1 % increments
- Installation Base (model: M2BS) is not adaptable
- Isolation: Input to output to power
- Line voltage effect: ±0.1 % over voltage range
- Maximum switching power: 600 VA or 150 W
- Maximum switching voltage: 250 V AC or 120 V DC
- Mechanical life: 5 × 107 cycles
- Minimum Load: 5 V DC @10 mA
- Mounting: Surface or DIN rail
- Operating humidity: 30 to 90 %RH (non-condensing)
- Operating temperature: -5 to +55°C (23 to 131°F)
- Over-range input: -14 to +113.5 %
- Power ON timer: Rating ±0.5 sec
- Reset input: Latched output reset with the front control button or remotely via base socket terminals
- Set-point accuracy: ±0.5 %
- Set-point adjustments: Thumb-wheel switches (front); 0 – 99 % independently; 1 % increments
- Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
- Trip point repeatability: ±0.05 %
- Weight: 150 g (0.33 lbs)
Applications
- None Available
Aliases
- None Available