M2AS - M-Systems M2AS Mini-M Series Super-mini Signal Conditioner; DC Alarm (thumb-wheel switch adjustments, DPDT output)

M2AS - M-Systems M2AS Mini-M Series Super-mini Signal Conditioner; DC Alarm (thumb-wheel...

Request Quote
For Price

Part Number:: M2AS
Model Number:: M2AS
Make:: M-SYSTEMS
Lead Time:: Available
Qty In Stock:: Available

M-Systems M2AS Mini-M Series Super-mini Signal Conditioner; DC Alarm (thumb-wheel switch adjustments, DPDT output) Simple Type: Signal Conditioning

Signal conditioners convert a field signal from various sensors into standard signal suitable for processing in PLC, DCS or PC-based systems. They are also used to boost a signal to increase load drive capability, to isolate a signal to stop ground loops. More than 75000 combinations of process signal I/O, power input and mounting configuration are selectable. Additionally, M-System offers the broadest line of signal splitters available. M2 Series Signal Conditioners are designed to accept a largest range of process signal inputs and provide a standard and non-standard DC output.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

2000V AC isolation
Base socket included with modules
CE marking and UL/C-UL Class 1 Div 2 approval (selected models)
Fixed range or PC programmable models selectable
M2 use a compact-size, plug-in socket base for quick installation or replacement of modules without disturbing wiring.
Selectable 100-240V AC/24V DC power input
Standard DIN rail or surface mounting

Specifications

General

Codes 1, 2: Rating ±25 msec.
Codes 3 to 8: Rating ±20 %
Connection: M3 screw terminals (torque 0.8 N-m)
Construction: Plug-in
DC Current: Shunt resistor attached to the input terminals (0.5 W)
Dead-band (hysteresis): Thumbwheel switches (front); 1 – 99 % independently; 1 % increments (latching output when set to 00)
Dead-band set-point accuracy: ±0.5 %
Delay time (response time with 90 % set-point for a step input 0 – 100 %): Performance
Dielectric strength: 2000 V AC @1 minute (input to output to power to ground)
Front LEDs: Red light turns on when the coil is energized.
Housing Material: Flame-resistant resin (black)
Isolation: Input to output to power
Line voltage effect: ±0.1 % over voltage range
Maximum switching power: 600 VA (360 VA with enclosed relay) or 150 W
Maximum switching voltage: 250 V AC or 30 V DC
Mechanical life: 5 × 107 cycles
Minimum Load: 5 V DC @10 mA
Over-range input: -14 to +113.5 %
Power ON timer: Rating ±0.5 sec.
Reset Contact Input: ON resistance:
Reset input: Latched output reset with the front control button or remotely via base socket terminals
Set-point accuracy: ±0.5 %
Set-point adjustments: Thumbwheel switches (front); 0 – 99 % independently; 1 % increments
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Trip point repeatability: ±0.05 %

Applications

None Available

Aliases

None Available

M-SYSTEMS Industrial Partner