20VS5-100 - M-Systems 20VS5-100 Hybrid Isolation Amplifiers 20 Series; Isolation Amplifier (bi-directional...
- Part Number:
- 20VS5-100
- Model Number:
- 20VS5-100
- Make:
- M-SYSTEMS
- Lead Time:
- Available
- Qty In Stock:
- Available
M-Systems 20VS5-100 Hybrid Isolation Amplifiers 20 Series; Isolation Amplifier (bi-directional amplifier) Simple Type: Signal Conditioning
Signal conditioners convert a field signal from various sensors into standard signal suitable for processing in PLC, DCS or PC-based systems. They are also used to boost a signal to increase load drive capability, to isolate a signal to stop ground loops. More than 75000 combinations of process signal I/O, power input and mounting configuration are selectable. Additionally, M-System offers the broadest line of signal splitters available. Isolation amplifiers provide signal and power isolation for data acquisition components to protect them from noises present at remote devices.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Being used for printed wiring board installation
- Bidirectional amplifier
- Power 15 V DC
- Small installation area in printed wiring board
- Up to 2.3 kV isolation between input to output or power input
Specifications
- CMRR: Greater than or equal to 100 dB (500 V AC 50/60 Hz)
- Construction: Hybrid IC
- Conversion gain: ×0.95 ±15 % (load greater than or equal to 1 M Omega)
- DC Power input: Operational voltage range 11.5 – 16 V; ripple 2 %p-p max.; approx. 7 mA with no load
- Dielectric strength: 2300 V AC @1 minute (input or reference voltage source to output or power)
- Frequency characteristics: Approx. 5 kHz, -3 dB
- Housing material: Flame-resistant resin (black)
- Insulation resistance: Greater than or equal to 100 M Omega with 500 V DC
- Isolation: Input to output or power
- Line voltage effect: ±0.2 % over voltage range (with ±5 V input)
- Linearity: ±0.2 %
- Mounting: Soldering to the printed wiring board
- Operating humidity: 30 to 90 %RH (non-condensing)
- Operating temperature: -10 to +70°C (14 to 158°F)
- Response time: Less than or equal to 90 µsec. (0 – 90 %)
- Temp. coefficient: Offset drift 50 ppm/°C; Span drift 100 ppm/°C (200 ppm/°C at less than or equal to 10°C)
- Weight: 50 g (1.76 oz)
Applications
- None Available
Aliases
- None Available
Related Items
BGA7x10-ZIF-ADPT
M-Systems BGA7x10-ZIF-ADPT Generic adapter for FBGA 7x10 mm form factor- BGA7X10-DIP32-ADPT
ADAPTER FOR BGA 7X10 TO 32-DIP - BGA9X12-DIP32-ADPT
ADAPTER FOR BGA 9X12 TO 32-DIP - BGA9x12-ZIF-ADPT
M-Systems BGA9x12-ZIF-ADPT Generic adapter for FBGA 9x12 mm form factor