20VS4-384 - M-Systems 20VS4-384 Hybrid Isolation Amplifiers 20 Series; Isolation Amplifier (5 kV input isolation)

20VS4-384 - M-Systems 20VS4-384 Hybrid Isolation Amplifiers 20 Series; Isolation Amplifier (5...

Request Quote
For Price

Part Number:: 20VS4-384
Model Number:: 20VS4-384
Make:: M-SYSTEMS
Lead Time:: Available
Qty In Stock:: Available

M-Systems 20VS4-384 Hybrid Isolation Amplifiers 20 Series; Isolation Amplifier (5 kV input isolation) Simple Type: Signal Conditioning

Signal conditioners convert a field signal from various sensors into standard signal suitable for processing in PLC, DCS or PC-based systems. They are also used to boost a signal to increase load drive capability, to isolate a signal to stop ground loops. More than 75000 combinations of process signal I/O, power input and mounting configuration are selectable. Additionally, M-System offers the broadest line of signal splitters available. Isolation amplifiers provide signal and power isolation for data acquisition components to protect them from noises present at remote devices.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

Being used for printed wiring board installation
Gain adjustable range, × 1 to × 10
High CMRR
Power 15 V DC
Small installation area in printed wiring board
Up to 5 kV isolation between input to output or power input

Specifications

General

CMRR: 114 dB TYP. (500 V AC 50/60 Hz)
Construction: Hybrid IC
Conversion gain: ×1 ±1%
DC Power Input: Operational voltage range 13 – 16 V; ripple 2 %p-p max.; approx. 7 mA with no load
Dielectric strength: 5000 V AC @3 minute (input or reference voltage source to output or power)
Frequency characteristics: Approx. 1 kHz, -3 dB
Gain adjustable range: × 1 to × 10
Housing material: Flame-resistant resin (black)
Insulation resistance: Greater than or equal to 100 M Omega with 500 V DC
Isolation: Input to output or power
Line voltage effect: ±0.1% over voltage range
Linearity: ±0.05 %
Mounting: Soldering to the printed wiring board
Operating humidity: 30 to 90 %RH (non-condensing)
Operating temperature: -10 to +70°C (14 to 158°F)
Response time: Less than or equal to 450 µsec. (0 – 90 %)
Temp. coefficient: Offset drift 10 ppm/°C TYP. @G - 1 (20 ppm/°C max.); span drift 20 ppm/°C TYP. @G - 1 (50 ppm/°C max.)
Weight: 20 g (0.71 oz)

Applications

None Available

Aliases

None Available

M-SYSTEMS Industrial Partner