20VS2-01 - M-Systems 20VS2-01 Hybrid Isolation Amplifiers 20 Series; Isolation Amplifier (3-Port Isolation)

20VS2-01 - M-Systems 20VS2-01 Hybrid Isolation Amplifiers 20 Series; Isolation Amplifier (3-Port...

Request Quote
For Price

Part Number:: 20VS2-01
Model Number:: 20VS2-01
Make:: M-SYSTEMS
Lead Time:: Available
Qty In Stock:: Available

M-Systems 20VS2-01 Hybrid Isolation Amplifiers 20 Series; Isolation Amplifier (3-Port Isolation) Simple Type: Signal Conditioning

Signal conditioners convert a field signal from various sensors into standard signal suitable for processing in PLC, DCS or PC-based systems. They are also used to boost a signal to increase load drive capability, to isolate a signal to stop ground loops. More than 75000 combinations of process signal I/O, power input and mounting configuration are selectable. Additionally, M-System offers the broadest line of signal splitters available. Isolation amplifiers provide signal and power isolation for data acquisition components to protect them from noises present at remote devices.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

Being used for printed wiring board installation
High-linearity
Isolating between input, output and power
Isolation between input, output and power supply up to 1500V AC
Low power consumption
Power 15V DC

Specifications

General

CMRR: Greater than or equal to 100 dB (500 V AC 50/60 Hz)
Construction: Hybrid IC
Conversion gain: ×0.995 ±1 % max
DC Power input: Operational voltage range: Rating ±5 %; approx. 7 mA with no load; ripple 2% p-p max
Dielectric strength: 1500 V AC @1 minute (input or reference voltage source to output to power)
Frequency characteristics: Approx. 1 kHz, -3 dB
Housing Material: Epoxy resin
Insulation resistance: Greater than or equal to 100 M Omega with 500 V DC
Isolation: Input to output to power
Line voltage effect: ±0.05 % over voltage range
Linearity: ±0.001 % TYP. @G - 1 (±0.05 % max)
Mounting: Soldering to the printed wiring board
Operating humidity: 30 to 90 %RH (non-condensing)
Operating temperature: -10 to +70°C (14 to 158°F)
Response time: Less than or equal to 390 µsec. (0 – 90 %)
Temp. coefficient: Offset drift 5 ppm/°C TYP. @G - 1 (20 ppm/°C max.); span drift 10 ppm/°C TYP. @G - 1 (50 ppm/°C max.)
Weight: 20 g (0.71 oz)

Applications

None Available

Aliases

None Available

M-SYSTEMS Industrial Partner