20VS5-200 - M-Systems 20VS5-200 Hybrid Isolation Amplifiers 20 Series; Isolation Amplifier (ultra-high speed response, input isolation)

20VS5-200 - M-Systems 20VS5-200 Hybrid Isolation Amplifiers 20 Series; Isolation Amplifier (ultra-high...

Request Quote
For Price

Part Number:: 20VS5-200
Model Number:: 20VS5-200
Make:: M-SYSTEMS
Lead Time:: Available
Qty In Stock:: Available

M-Systems 20VS5-200 Hybrid Isolation Amplifiers 20 Series; Isolation Amplifier (ultra-high speed response, input isolation) Simple Type: Signal Conditioning

Signal conditioners convert a field signal from various sensors into standard signal suitable for processing in PLC, DCS or PC-based systems. They are also used to boost a signal to increase load drive capability, to isolate a signal to stop ground loops. More than 75000 combinations of process signal I/O, power input and mounting configuration are selectable. Additionally, M-System offers the broadest line of signal splitters available. Isolation amplifiers provide signal and power isolation for data acquisition components to protect them from noises present at remote devices.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

Being used for printed wiring board installation
Isolating between input to output or power
Isolation between input to output or power supply up to 1500 V AC
Power 15V DC
Response time 10 µs

Specifications

General

CMRR: Greater than or equal to 100 dB (500 V AC 50/60 Hz)
Construction: Hybrid IC
Conversion gain: ×1 ±8 % max
DC Power input: Operational voltage range 11.5 – 16 V; ripple 2 %p-p max.; approx. 40 mA with no load
Dielectric strength: 1500 V AC @1 minute (input or reference voltage source to output or power)
Frequency characteristics: Approx. 50 kHz, -3 dB
Gain adjustable range: × 1 to × 10
Housing material: Epoxy resin
Insulation resistance: Greater than or equal to 100 M Omega with 500 V DC
Isolation: Input to output or power
Line voltage effect: ±0.5 % over voltage range
Linearity: ±0.5 % @G - 1
Mounting: Soldering to the printed wiring board
Operating humidity: 30 to 90 %RH (non-condensing)
Operating temperature: -10 to +70°C (14 to 158°F)
Response time: Less than or equal to 10 µsec. (0 – 90 %)
Ripple: ±7 %p-p max. (G- 1)
Temp. coefficient: Offset drift 50 ppm/°C; span drift 200 ppm/°C
Weight: 8 g (0.28 oz)

Applications

None Available

Aliases

None Available

M-SYSTEMS Industrial Partner