M-SYSTEMS Industrial Partner

20VS5-140 - M-Systems 20VS5-140 Hybrid Isolation Amplifiers 20 Series; Isolation Amplifier (output...

larger image

Request Quote
For Price
Part Number:
20VS5-140
Model Number:
20VS5-140
Make:
M-SYSTEMS
Lead Time:
Available
Qty In Stock:
Available

M-Systems 20VS5-140 Hybrid Isolation Amplifiers 20 Series; Isolation Amplifier (output isolation) Simple Type: Signal Conditioning

Signal conditioners convert a field signal from various sensors into standard signal suitable for processing in PLC, DCS or PC-based systems. They are also used to boost a signal to increase load drive capability, to isolate a signal to stop ground loops. More than 75000 combinations of process signal I/O, power input and mounting configuration are selectable. Additionally, M-System offers the broadest line of signal splitters available. Isolation amplifiers provide signal and power isolation for data acquisition components to protect them from noises present at remote devices.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • Being used for printed wiring board installation
  • Power 15V DC
  • Small installation area in printed wiring board
  • Small stray capacitance between input and output
  • Up to 2.3 kV isolation between output to input or power input

Specifications

    General
  • CMRR: Greater than or equal to 100 dB (500 V AC 50/60 Hz)
  • Construction: Hybrid IC
  • Conversion gain: ×0.95 ±5 %
  • DC Power input: Operational voltage range 11.5 – 16 V; ripple 2 %p-p max.; approx. 7 mA with no load
  • Dielectric strength: 2300 V AC @1 minute (output or reference voltage source to input or power)
  • Frequency characteristics: Approx. 5 kHz, -3 dB
  • Housing material: Flame-resistant resin (black)
  • Insulation resistance: Greater than or equal to 100 M Omega with 500 V DC
  • Isolation: Output to input or power
  • Line voltage effect: ±0.2 % over voltage range
  • Linearity: ±0.05 %
  • Mounting: Soldering to the printed wiring board
  • Operating humidity: 30 to 90 %RH (non-condensing)
  • Operating temperature: -10 to +70°C (14 to 158°F)
  • Response time: Less than or equal to 90 µsec. (0 – 90 %)
  • Temp. coefficient: Offset drift 30 ppm/°C; span drift 100 ppm/°C
  • Weight: 50 g (1.76 oz)

 

Applications

  • None Available

Aliases

  • None Available